Grip Lock Non Slip Rug Pad

What This Rug Pad Is

The Grip Lock Non Slip Rug Pad is a small adhesive pad that holds rugs and mats in place on hard floors indoors. It is made from hardwearing PVC and polyester, so it stands up to daily foot traffic. The ribbed suction side presses against the floor and grips it, while the adhesive backing sticks to the underside of the rug. Each pad is 4 x 4 in (10 x 10 cm), and the set includes 4 pads. This pad is built for hard floors only. Do not use it on carpeted floors.

Sizes and What You Get

Each pad is a compact square that fits under the corners or edges of small rugs, mats and runners. The set gives you 4 pads, enough for a small rug at each corner or for several mats around the home.

If you have a larger rug, you can space the pads along the edges and corners to stop it from sliding. For a small mat, a single pad at each corner is often enough.

Colors

You can pick White or Black to match your rug or floor. White blends with light floors and pale rugs. Black works well with dark floors and darker rugs. Both colors use the same PVC and polyester build and the same ribbed suction side.

How to Use It

1. Clean and dry the floor where the rug will sit. Dust and moisture weaken the grip.
2. Peel the backing to expose the adhesive side.
3. Press the adhesive side onto the underside of the rug, near a corner or edge.
4. Set the rug down on the hard floor and press the ribbed side against the floor.
5. Repeat with the other pads, placing them at the remaining corners or along the edges.

For a runner, place pads near both ends and, if needed, along the middle. For a small mat, one pad at each corner usually holds it steady. The ribbed suction side grips the floor, and the adhesive backing keeps the pad attached to the rug. This two-sided hold is what keeps the rug from sliding when you walk on it.

This pad is made for hard floors indoors, such as tile, wood, laminate and vinyl. It is not for use on carpeted floors. On carpet, the suction side has nothing firm to grip, so the pad will not hold as intended.

Care and Reuse

Wipe the pad with a damp cloth when it picks up dust or lint, then let it dry fully before you press it back down. A clean pad grips better. If the pad loses its hold, lift it, clean the floor and the pad, and press it down again. Store unused pads flat in a dry place. Keep them away from extreme heat, which can soften the PVC.

Check the pads now and then. If a pad works loose, press it back onto the rug and floor. For rugs that get heavy use, you can add a pad or move the existing pads closer to the corners. The set of 4 pads gives you spares for other mats in the same room or in another room.

Why Shoppers Choose This Pad

Small rugs and mats slide on smooth hard floors. This pad adds a grip layer between the rug and the floor without adding bulk. The ribbed suction side holds the floor, and the adhesive backing holds the rug. The result is a rug that stays where you put it. The compact 4 x 4 in (10 x 10 cm) size fits under the corners of most small rugs, and the set of 4 covers a full rug or several mats. Choose White or Black to suit your space.